Kawasaki Plunger Pump Assembly K7V240DPH, suitable for Sany 650 and XCMG 650 excavators.

Kawasaki K7V240DPH1N7R-0E01-PV Hydraulic Pump Detailed Explanation
This is a large-displacement dual-variable axial piston pump from Kawasaki's new generation K7V series, designed specifically for 70-80 ton-class large excavators. It is also the mainstream upgraded main pump for models such as Sany SY750.
Model Breakdown
| Part | Meaning Explanation |
| K7V | Kawasaki's new generation high-pressure axial piston pump series, positioned to replace the traditional K3V series. |
| 240 | Single pump displacement: 240 cm³/r |
| DP | Double Parallel - Dual pump parallel structure, total displacement 480 cm³/r |
| H1N7R | Control logic: Negative flow + constant power torque limit, clockwise rotation (from shaft end perspective). |
| 0E01-PV | Custom adaptation code, matching the hydraulic system of Sany SY750 and other models. |
Core Technical Parameters
| Item | Parameter |
| Rated Pressure | 35 MPa (350 bar) |
| Peak Pressure | 40 MPa (400 bar) |
| Maximum Speed | 2,000 rpm (1,800 rpm recommended for mining heavy-duty conditions) |
| Control Method | Negative Flow Control (NFC) + Constant Power Torque Limit Control |
| Theoretical Flow (Dual Pump) | Approximately 480 cm³/r × 1800 rpm = 864 L/min |
| Weight | ~350 kg (including regulator and solenoid valve assembly) |
| Origin | Japan Original (certificate marked MADE IN JAPAN) |
Product Features and Advantages
1. **K7V Series Upgraded Design**: Compared to the traditional K3V series, the K7V pump adopts a low-noise structure and reinforced bearings, improving hydraulic efficiency by approximately 5%, reducing noise, and making it more suitable for long-term mining heavy-duty operations.
2. **High Flow Output**: With a total displacement of 480 cc from dual pumps in parallel, it provides ample flow for composite movements of the boom, dipper stick, and bucket of large excavators, ensuring efficient heavy-load lifting.
3. **Sany-Specific Adaptation**: The DPH1N7R control scheme is deeply matched with Sany's electronic control system, ensuring precise flow distribution and balancing operational efficiency with fuel consumption control.
4. **High Reliability Structure**: Core components (cylinder block, distributor plate, pistons) are original Kawasaki parts, offering impact resistance, wear resistance, and suitability for harsh mining conditions.

 Compatible Models and Maintenance Notes
- **Compatible Models**: 70-80 ton-class excavators such as Sany SY600, SY750, XCMG XE750; Sany SR400 rotary drilling rig; Sany SMHC160-D3 (RU) tracked material handler; and some imported models of the same tonnage can be universally replaced.
- **Common Fault Diagnosis**:
- Weak operation/slow speed: First check if the regulator solenoid valve is stuck, or if excessive internal leakage is caused by wear of the distributor plate or piston cylinder block.
- Stalling when hot, pressure not rising: Often due to hydraulic oil contamination, reduced viscosity, or failure of the constant power control logic. Check the pilot pressure and main pump regulator.
- **Maintenance Recommendations**:
- Regularly replace hydraulic oil and filters to prevent pump internal wear caused by oil contamination.
- Ensure coaxiality of the spline shaft and coupling during installation to avoid damage to the input shaft from misalignment.
- New pumps must be degassed according to requirements to prevent dry running damage to pistons and cylinder blocks.