Sany Original Filter: 60274030 Oil Suction Filter P010097C, Replacement New Code GLQ009265950

Sany Oil Suction Filter | 60274030 (P010097C, New Code GLQ009265950)
I. Part Number Information
- Old Original Equipment Manufacturer (OEM) Part Number: 60274030; Industry Standard Model: P010097C
- Sany Updated Replacement Code: GLQ009265950 (GLQ is Sany's new filter material coding system; both codes are interchangeable for original equipment and procurement orders)
Note: After the upgrade of Sany's parts system, old codes are being phased out. The new GLQ code is the standard warehouse intake code. Products of the same specification are interchangeable.
II. Product Structure and Specifications
1. Structural Features
- Integrated long pull rod locking structure with hexagonal locking nut for internal installation and fixation in the oil tank;
- Main body consists of a stainless steel folded filter mesh and an outer perforated protective cylinder. The large opening design at the suction port ensures high oil flow capacity and resistance to collapse;
- Metal stamped end cap, which withstands hydraulic vacuum and deformation, suitable for built-in installation conditions in the oil tank.
2. Key Specifications
- Filtration Accuracy: 80~120μm (for coarse filtration of incoming oil in the hydraulic oil tank, intercepting large particle impurities)
- Installation Type: Built-in insertion type in the oil tank, secured by a long screw rod passing through for locking
III. Compatible Models
Compatible with the suction ports of hydraulic oil tanks on Sany SY75/95/115/135/155 series medium and small tonnage excavators for hydraulic pump front-end oil inlet filtration.
Function: Installed at the front end of the hydraulic oil pump suction line in the hydraulic oil tank. It blocks large impurities such as iron shavings and rubber chunks from entering the main hydraulic pump, preventing pump body scoring and abnormal noise faults.
IV. Maintenance and Replacement Guidelines
1. Replacement Cycle: 2000 hours under normal operating conditions; 1000~1200 hours under harsh sandstone/mining conditions;
2. Fault Indicators: A clogged filter element can cause poor oil suction, cavitation noise in the main pump, and weak operation. Timely inspection and replacement are required;
3. OEM Advantages: Stainless steel filter media offer corrosion resistance and can be low-pressure flushed and reused, significantly exceeding the service life of ordinary iron mesh aftermarket parts.
V. Procurement Notes
60274030 and GLQ009265950 are dual codes for the same product. Either code can be used for domestic and international trade orders. P010097C is an industry circulation code commonly selected in the repair market.